Jun-Air, Air Compressor

$550

Jun-Air Compressor – (Used) Silent Air Compressor, 1/2 HP, 110 volts, Noise Level 40 Decibels, 9.5 Ltr. tank, priced at $550 plus shipping from Atlanta.  This model is very popular in many frame shops.

Silentair Air Compressor

$985

Model 50-24 Silent Air Compressor, NEW from factory, 1/2 HP, 110/220 volts, Noise Level 40 Decibels, 6 gallon tank, 84 – 114 PSI Operating range, priced at $985 FOB Houston, TX. (Item 259-0409-A1) Other models available but this model is very popular in many frame shops.

Nice Flip Art Bin – made by Selwyns – on wheels, size 30″ x 42″, priced at $100 plus shipping.

Ro-Ma FP15 Flex driver in good condition, priced at $150 plus shipping.

40″ system with attached wand, with timer, good condition, priced at $250 plus shipping from Atlanta.

Measures 43 1/2″ long by 21″ deep; base width is 25″, priced at $70 plus shipping.

Open to just under 7″ wide, on swivel base, priced at $100 each plus shipping from Atlanta.  I have 2 available. 

Model SFW10XP, fires C06 to C10 Staples (3/8″ to 5/8″ staples), priced at $95 plus shipping from Atlanta.

RagMount is a heat-activated adhesive with a 100% cotton rag tissue carrier.  New roll price of over $300; available roll with 2/3 roll remaining priced at $175 plus shipping from Atlanta.  See more at http://www.gwjcompany.com/index.php?main_page=product_info&products_id=2441 (Ref 12100 A)

Clear Release film is a 1.4 mil polyester release liner siliconised on both sides; new roll price is $128 roll; available is 1/4 roll priced at $25 plus shipping from Atlanta.  More info at http://www.drytac.com/graphic-tools/clear-silicone-release-film.html (Ref 12100 D)

In very good condition, fires double barbed multi points, priced at $60 plus shipping from Atlanta.  Click link for data sheet.

For pushing nails or points into wide frames, in good condition, priced at $25 plus shipping cost from Atlanta.  Click for data sheet.

Appears to be new in box, with instructions, priced at $45 plus shipping from Atlanta.

2 each freshly sharpened Brevetti 80 carbide tooth saw blades.  275 x 3.2 x 32 mm; These are Brevetti brand blades, priced at $125 each FOB Atlanta.

2 each freshly sharpened 100 tooth 14″ blades; bore size of 5/8″, will fit Pistorius EMN14 double miter saw; Ultramiter p/n is U1400-6, priced at $150 each FOB Atlanta.

Also available are 2 each Ultramiter Brand 100 tooth carbide blades like above but need sharpening, priced at $85 FOB Atlanta.

From United Mfg. with full 40″ Wire/Wand 45″, easy grip handle and extra long cord allows you to shrink wrap any shape or size, in good condition, priced at $275 FOB Atlanta.

Miter corner clamps, light weight, priced at $5/clamp FOB Atlanta.

Protective film carpet protection against continuous heave usage, makes cleanup much quicker and easier.

(Item # 243-H1002) Senco Model SLP20, 18 gauge, sizes 5/8″ to 1 5/8″ or 16mm to 41mm, two years old, comes with plastic case and owner’s manual, priced at $75 FOB Atlanta.

For tacking dry mounts, priced $45 FOB Atlanta.

A 5 wheel hand held piercing tool for perforating Print Guard films.  For use when laminating non-porous materials.  Like new condition, priced at $45 FOB Atlanta.  

$28 FOB Atlanta.  Check for availability.  

(used) $12 fob Atlanta.

For the IM-5 Underpinner, these were removed for air actuated clamps when the machine was new, priced at $25/each plus shipping from Atlanta.

Open sign measures 27″ tall, pull switch on/off, priced at $75 FOB Atlanta.

Custom Paper Holder

$50

Nice custom made paper holders for rolls up to 48″.  These are from a Fast Frame Shop.  Priced at $50 plus shipping from Atlanta.

Dry Mount Pressure Plate by Bienfang

$45

Bienfang Weight for Dry Mounting.  The weight measures 20″ x 20″ and is quite heavy.  Use it to keep dry mount nice and flat while it cools down coming out of the press or to help flatten work down that is wrinkled.  Priced at $45 plus shipping cost from Atlanta.

Decor 788 Drymount Tissue

$100/box

2 New Boxes plus 3rd box of almost full tissue (same 788 Drymount from Decor) available – these sell for over $100/box at Decor – all 3 boxes priced at $180 plus shipping.

Comes with instructions, priced at $45 plus shipping cost from Atlanta.

Very Good Condition, 1.75 HP Fiac A/C with 6.5 gallon tank, maintains air pressure from 85 PSI to 110 PSI, although not a silent model is runs quieter than most comparable models, has wet sump lubrication and visible oil-level indicator, priced at $400 plus shipping from Atlanta.

These lifters go on each side of any Fletcher mat cutter clamp and are spring loaded to keep clamp up enough to insert and remove mat board without lifting up on the bar each time.  Very helpful.  Priced at $30 for the set plus shipping from Atlanta.

Herb’s Needlepoint Blocking Frame is designed to provide a finely blocked piece of needle art.  It has a capacity of 33″ x 33″; priced at $65 plus shipping from Atlanta.

Swivels and tilts, has speed handles, excellent condition,  priced at $50 fob Atlanta.  (Item # 246-H)

Model SLP20, 18 Gauge, fires nails sized from 5/8″ to 1 5/8″ length, Priced at $50 plus shipping form Atlanta.

Part number TR41150; Trimount is a neutral PH white mounting tissue coated on both sides with a heat activated solvent acrylic adhesive which is tack-free at normal ambient temperature and does not require a release liner; new roll price $198; estimated available is 1/4 of a roll priced at $40 plus shipping from Atlanta.  See description at  http://www.drytac.com/trimounttm-rolls.html (ref. 12100 C)

34″ x 100′ roll; new roll price $65, available 1/2 roll priced at $25 plus shipping from Atlanta. (Ref 12100E)

In very good condition, comes with a 52″ measuring arm and owner’s manual, priced at $245 FOB Atlanta.

Fletcher FlexiMaster Point Driver – in very good condition, fires flexible points, priced at $60 plus shipping from Atlanta.

Model 302 with blades, priced at $25 plus shipping from Atlanta.

In good condition, priced at $35 plus shipping from Atlanta.

New in the box a 36″ paper dispenser, priced at $20 FOB Atlanta.

2 each freshly sharpened 80 tooth 14″ blades; bore size of 5/8″, will fit Pistorius EMN14 double miter saw; Skarpaz p/n is DM1480A, priced at $125 each FOB Atlanta.

For C&H, Larson Juhl, and Caruthers oval/circle cutters, stem type blades that can be re-sharpened and the style that holds razor, and glass cutting tool.  Priced at $35 – $65 each FOB Atlanta.

3 boxes of 7 mm and 2 boxes of 10 mm for the Euro brand Underpinners, priced at $135 for all FOB Atlanta.

By Seal for tacking dry mounts, heat range low-medium-high, priced $50 FOB Atlanta.

Uline model H-1029 Impulse Sealer, 20″ size, comes with new roll on continuous feed bag material, 2 new heating elements for machine, purchased 2 years ago, priced at $125 FOB Atlanta.

18 gauge brad gun by Porter Cable, model BN125, Type1 s/n 127173, priced at $65 fob Atlanta.

Direct from Denmark, new chopper blades from Morso, (not after market blades) priced at $315 plus shipping.

For 1.5 HP JDS Dust Force Dust Collector (pictured above), new in box, never used, new price over $100, priced at $35 plus shipping from Atlanta.

For the IM-5 Underpinner, these were removed for air actuated clamps when the machine was new, priced at $25/each plus shipping from Atlanta.

Terminal/printer Model Number – Nurit 2085, Pin Pad Model Number 1000SE.  Priced at $200 fob Atlanta.